Flow Control Ball Lock Disconnect Beverage Out – 1/4 inch Flared
Flow Control Ball Lock Disconnect Beverage Out – 1/4 inch Flared
1/4″ Flared swivel nuts with barbs & nylon flared washer (not included).
Only 3 left in stock
Only 3 left in stock
Additional Information
Flow Control Ball Lock Disconnect Beverage Out – 1/4 inch Flared
This stainless steel flow control disconnect will eliminate the guess work of balancing draft lines.
Use the adjustment knob to dial in the ideal flow resistance based on the beverage being served.
Some say flow control disconnects perform better than flow control faucets as they put the point of resistance at the beginning of the beverage line instead of at the end.
When beer passes through the flow control apparatus inside the faucet, turbulence will cause carbonation to come out of solution and foaming issues occur.
Flow control disconnects on the other hand have the ability to restrict the flow before the beer enters the beer line so the head pressure created by the beer line keeps the carbonation in solution.
Be sure to use a nylon flared washer between the swivel nut and disconnect.
Please note: make sure your keg post o-rings are in good condition before using this fitting. If they are overly worn and you are not getting a good seal, replace the post o-ring then re-attach the ball lock fitting.
